jdreetz/kenner-super-power 🖼️🔢❓📝✓ → 🖼️

▶️ 290 runs 📅 Jun 2025 ⚙️ Cog 0.13.6

About

Example Output

Prompt:

Head & Hair
Hair: Long, voluminous, curly blonde hair with prominent ringlets. Worn loose.

Headband: red headband around her forehead, visible in the side and back views. Her hair above the headband it bundled by the headband and pushed back, but somewhat high, with a small blonde curl falling down over the headband in the front. Below the headband her hair is lose. Her hairstyle slightly ressembles a mullet.

Facial Features: Classic comic book style with bright eyes, full lips, and a confident expression. Her teeth are showing slightly.

Costume (Upper Body)
Top: Blue long-sleeve fitted top with red trim at the neck.

Logo: Large red and yellow S shield on her chest (front view). The red part of the logo extends out to the cape area and completely covers her shoulders. There are two fine yellow lines on the top left and top right side of the logo, which separate the logo from the red area.

Cape: Red on the outside, white lining. Shoulder-attached and flows down her back. In the back view, it’s open to show the full yellow “S” symbol.

Costume (Lower Body)
Skirt: Short, pleated, bright red skirt with dynamic folds suggesting movement.

Belt: V-shaped belt sitting at the waist. The V is pointing down and spans the waist (because it's a belt)

Legwear & Boots
Boots: Red knee-high boots with yellow upward-pointing triangular designs at the top.

Bare Legs: No tights or leggings—legs are bare.

Color Scheme
Primary Colors: Bright red, yellow, and blue (classic Superman family palette).

Secondary Detail: White cape interior, yellow belt and boot trim.

Pose and Style
The figure stands confidently, with fists clenched or on hips.

Body proportions are athletic and slightly stylized—broad shoulders, slim waist, muscular but not exaggerated.

The style reflects 1980s superhero comics: clean lines, bright flat colors, bold shapes.

a full body render of a kennersuperpowers action figure

Output

Performance Metrics

3.34s Prediction Time

3.37s Total Time

All Input Parameters

{
  "image": "https://replicate.delivery/pbxt/N7fqrtbcdfZ4muJ6A3y2wbrxZmAur9Tgc5GvxMMf52ufXX7A/out-1%20%281%29.webp",
  "model": "dev",
  "prompt": "Head & Hair\nHair: Long, voluminous, curly blonde hair with prominent ringlets. Worn loose.\n\nHeadband: red headband around her forehead, visible in the side and back views. Her hair above the headband it bundled by the headband and pushed back, but somewhat high, with a small blonde curl falling down over the headband in the front. Below the headband her hair is lose. Her hairstyle slightly ressembles a mullet.\n\nFacial Features: Classic comic book style with bright eyes, full lips, and a confident expression. Her teeth are showing slightly.\n\nCostume (Upper Body)\nTop: Blue long-sleeve fitted top with red trim at the neck.\n\nLogo: Large red and yellow S shield on her chest (front view). The red part of the logo extends out to the cape area and completely covers her shoulders. There are two fine yellow lines on the top left and top right side of the logo, which separate the logo from the red area.\n\nCape: Red on the outside, white lining. Shoulder-attached and flows down her back. In the back view, it’s open to show the full yellow “S” symbol.\n\nCostume (Lower Body)\nSkirt: Short, pleated, bright red skirt with dynamic folds suggesting movement.\n\nBelt: V-shaped belt sitting at the waist. The V is pointing down and spans the waist (because it's a belt) \n\nLegwear & Boots\nBoots: Red knee-high boots with yellow upward-pointing triangular designs at the top.\n\nBare Legs: No tights or leggings—legs are bare.\n\nColor Scheme\nPrimary Colors: Bright red, yellow, and blue (classic Superman family palette).\n\nSecondary Detail: White cape interior, yellow belt and boot trim.\n\nPose and Style\nThe figure stands confidently, with fists clenched or on hips.\n\nBody proportions are athletic and slightly stylized—broad shoulders, slim waist, muscular but not exaggerated.\n\nThe style reflects 1980s superhero comics: clean lines, bright flat colors, bold shapes.\n\na full body render of a kennersuperpowers action figure \n",
  "go_fast": false,
  "lora_scale": 1.05,
  "megapixels": "1",
  "num_outputs": 1,
  "aspect_ratio": "1:1",
  "output_format": "webp",
  "guidance_scale": 3,
  "output_quality": 80,
  "prompt_strength": 0.6,
  "extra_lora_scale": 1,
  "num_inference_steps": 32
}

Input Parameters

mask Type: string: Image mask for image inpainting mode. If provided, aspect_ratio, width, and height inputs are ignored.
seed Type: integer: Random seed. Set for reproducible generation
image Type: string: Input image for image to image or inpainting mode. If provided, aspect_ratio, width, and height inputs are ignored.
model Default: dev: Which model to run inference with. The dev model performs best with around 28 inference steps but the schnell model only needs 4 steps.
width Type: integerRange: 256 - 1440: Width of generated image. Only works if `aspect_ratio` is set to custom. Will be rounded to nearest multiple of 16. Incompatible with fast generation
height Type: integerRange: 256 - 1440: Height of generated image. Only works if `aspect_ratio` is set to custom. Will be rounded to nearest multiple of 16. Incompatible with fast generation
prompt (required) Type: string: Prompt for generated image. If you include the `trigger_word` used in the training process you are more likely to activate the trained object, style, or concept in the resulting image.
go_fast Type: booleanDefault: false: Run faster predictions with model optimized for speed (currently fp8 quantized); disable to run in original bf16
extra_lora Type: string: Load LoRA weights. Supports Replicate models in the format <owner>/<username> or <owner>/<username>/<version>, HuggingFace URLs in the format huggingface.co/<owner>/<model-name>, CivitAI URLs in the format civitai.com/models/<id>[/<model-name>], or arbitrary .safetensors URLs from the Internet. For example, 'fofr/flux-pixar-cars'
lora_scale Type: numberDefault: 1Range: -1 - 3: Determines how strongly the main LoRA should be applied. Sane results between 0 and 1 for base inference. For go_fast we apply a 1.5x multiplier to this value; we've generally seen good performance when scaling the base value by that amount. You may still need to experiment to find the best value for your particular lora.
megapixels Default: 1: Approximate number of megapixels for generated image
num_outputs Type: integerDefault: 1Range: 1 - 4: Number of outputs to generate
aspect_ratio Default: 1:1: Aspect ratio for the generated image. If custom is selected, uses height and width below & will run in bf16 mode
output_format Default: webp: Format of the output images
guidance_scale Type: numberDefault: 3Range: 0 - 10: Guidance scale for the diffusion process. Lower values can give more realistic images. Good values to try are 2, 2.5, 3 and 3.5
output_quality Type: integerDefault: 80Range: 0 - 100: Quality when saving the output images, from 0 to 100. 100 is best quality, 0 is lowest quality. Not relevant for .png outputs
prompt_strength Type: numberDefault: 0.8Range: 0 - 1: Prompt strength when using img2img. 1.0 corresponds to full destruction of information in image
extra_lora_scale Type: numberDefault: 1Range: -1 - 3: Determines how strongly the extra LoRA should be applied. Sane results between 0 and 1 for base inference. For go_fast we apply a 1.5x multiplier to this value; we've generally seen good performance when scaling the base value by that amount. You may still need to experiment to find the best value for your particular lora.
replicate_weights Type: string: Load LoRA weights. Supports Replicate models in the format <owner>/<username> or <owner>/<username>/<version>, HuggingFace URLs in the format huggingface.co/<owner>/<model-name>, CivitAI URLs in the format civitai.com/models/<id>[/<model-name>], or arbitrary .safetensors URLs from the Internet. For example, 'fofr/flux-pixar-cars'
num_inference_steps Type: integerDefault: 28Range: 1 - 50: Number of denoising steps. More steps can give more detailed images, but take longer.
disable_safety_checker Type: booleanDefault: false: Disable safety checker for generated images.

Output Schema

Output

Type: array • Items Type: string • Items Format: uri

Example Execution Logs

Loaded LoRAs in 0.53s
Using seed: 44265
Prompt: Head & Hair
Hair: Long, voluminous, curly blonde hair with prominent ringlets. Worn loose.
Headband: red headband around her forehead, visible in the side and back views. Her hair above the headband it bundled by the headband and pushed back, but somewhat high, with a small blonde curl falling down over the headband in the front. Below the headband her hair is lose. Her hairstyle slightly ressembles a mullet.
Facial Features: Classic comic book style with bright eyes, full lips, and a confident expression. Her teeth are showing slightly.
Costume (Upper Body)
Top: Blue long-sleeve fitted top with red trim at the neck.
Logo: Large red and yellow S shield on her chest (front view). The red part of the logo extends out to the cape area and completely covers her shoulders. There are two fine yellow lines on the top left and top right side of the logo, which separate the logo from the red area.
Cape: Red on the outside, white lining. Shoulder-attached and flows down her back. In the back view, it’s open to show the full yellow “S” symbol.
Costume (Lower Body)
Skirt: Short, pleated, bright red skirt with dynamic folds suggesting movement.
Belt: V-shaped belt sitting at the waist. The V is pointing down and spans the waist (because it's a belt)
Legwear & Boots
Boots: Red knee-high boots with yellow upward-pointing triangular designs at the top.
Bare Legs: No tights or leggings—legs are bare.
Color Scheme
Primary Colors: Bright red, yellow, and blue (classic Superman family palette).
Secondary Detail: White cape interior, yellow belt and boot trim.
Pose and Style
The figure stands confidently, with fists clenched or on hips.
Body proportions are athletic and slightly stylized—broad shoulders, slim waist, muscular but not exaggerated.
The style reflects 1980s superhero comics: clean lines, bright flat colors, bold shapes.
a full body render of a kennersuperpowers action figure
Input image size: 720x576
[!] Resizing input image from 720x576 to 720x576
[!] img2img mode
  0%|          | 0/20 [00:00<?, ?it/s]
  5%|▌         | 1/20 [00:00<00:02,  8.41it/s]
 10%|█         | 2/20 [00:00<00:02,  7.96it/s]
 15%|█▌        | 3/20 [00:00<00:02,  8.05it/s]
 20%|██        | 4/20 [00:00<00:02,  7.94it/s]
 25%|██▌       | 5/20 [00:00<00:01,  7.91it/s]
 30%|███       | 6/20 [00:00<00:01,  7.90it/s]
 35%|███▌      | 7/20 [00:00<00:01,  7.89it/s]
 40%|████      | 8/20 [00:01<00:01,  7.91it/s]
 45%|████▌     | 9/20 [00:01<00:01,  7.86it/s]
 50%|█████     | 10/20 [00:01<00:01,  7.86it/s]
 55%|█████▌    | 11/20 [00:01<00:01,  7.89it/s]
 60%|██████    | 12/20 [00:01<00:01,  7.85it/s]
 65%|██████▌   | 13/20 [00:01<00:00,  7.86it/s]
 70%|███████   | 14/20 [00:01<00:00,  7.87it/s]
 75%|███████▌  | 15/20 [00:01<00:00,  7.86it/s]
 80%|████████  | 16/20 [00:02<00:00,  7.88it/s]
 85%|████████▌ | 17/20 [00:02<00:00,  7.88it/s]
 90%|█████████ | 18/20 [00:02<00:00,  7.85it/s]
 95%|█████████▌| 19/20 [00:02<00:00,  7.89it/s]
100%|██████████| 20/20 [00:02<00:00,  7.85it/s]
100%|██████████| 20/20 [00:02<00:00,  7.89it/s]
Total safe images: 1 out of 1

Version Details

Version ID: 07dfdea3caecd4d596e1d5c99f23ff1b3f3917235289b82d8c2b5e49d523a712
Version Created: June 3, 2025

Run on Replicate →